Handling Errors And Problems; Error Messages - Omron M2 Instruction Manual

5.Handling Errors and Problems

5. Handling Errors and Problems
5.1

Error Messages

Error Display
24
Cause
Cuff is under inflated.
Movement during
measurement.
Air plug disconnected.
Arm cuff not applied
correctly.
Clothing is interfering
with the arm cuff.
Air is leaking from the
arm cuff.
The arm cuff was
inflated above
299 mmHg when
inflating the cuff
manually.
Remedy
Carefully read and repeat the
steps listed under section 3.4.
Repeat measurement. Remain
still and do not talk during
measurement.
Refer to section 3.3.
Insert the air plug securely.
Refer to section 3.2.
Apply the arm cuff correctly.
Refer to section 3.2.
Remove any clothing
interfering with the arm cuff.
Refer to section 3.2.
Replace cuff with new one.
Refer to Chapter 7.
Do not inflate the arm cuff
above 299 mmHg.
Refer to section 3.4.