Handling Errors And Problems; Error Messages - Omron M2 Compact Instruction Manual

5.Handling Errors and Problems

5. Handling Errors and Problems
5.1

Error Messages

Error Display
24
Cause
Cuff is under inflated.
Movement during
measurement
Air plug disconnected.
Arm cuff not applied
correctly.
Clothing is interfering
with the arm cuff.
Air is leaking from the
arm cuff.
The arm cuff was
inflated above 299
mmHg when inflating
the cuff manually.
Remedy
Carefully read and repeat the
steps listed under section 3.4.
Repeat measurement. Remain
still and do not talk during
measurement.
Refer to section 3.3.
Insert the air plug securely.
Refer to section 3.2.
Apply the arm cuff correctly.
Refer to section 3.2.
Remove any clothing
interfering with the arm cuff.
Refer to section 3.2.
Replace cuff with new one.
Refer to Chapter 7.
Release your finger from the
O/I START button before the
pressure reaches 299 mmHg,
when inflating the cuff
manually.
Refer to section 3.4.