Setting Up Your Dap-1520; Connecting To Your Dap-1520 - D-Link DAP-1520 User Manual

Section 2 - Installation

Setting Up Your DAP-1520

Plug in the DAP-1520 to a power outlet. Verify that the power LED
is blinking orange before continuing.
Ethernet
Outlet

Connecting to Your DAP-1520

You can use the WPS method to connect to the DAP-1520. Press
the WPS button on the DAP-1520 and its green LED will flash.
Then activate WPS on your client device and it should connect
automatically. Once you are connected to the DAP-1520, you can
then configure your DAP-1520 using the web-based configuration
in a web browser.
D-Link DAP-1520 User Manual 8