System - D-Link DAP-1520 User Manual

Section 3 - Configuration
This page allows you to save or restore your system configuration, reset, or reboot the DAP-1520. To access this page, point
to the Management drop down menu at the top of the page, and select System. Click Save at any time to save the changes
you have made on this page.
Save Settings Save the system settings onto a file to the local hard drive.
To Local Hard You will then see a file dialog where you can select a location
Drive: and enter a file name for the configuration file.
Load Settings Load the system settings from a previously saved file on the
From Local local hard drive.
Hard Drive:
Restore Restore the system settings to factory default settings. This
to Factory will erase all currently stored settings.
Default
Settings:
Reboot the Click Reboot to reboot the DAP-1520.
Device:
D-Link DAP-1520 User Manual

System

34