Setting Up Your Dch-M225 - D-Link DCH-M225/A1A User Manual

Section 2 - Coniguration
Plug in the DCH-M225 to a power outlet. Verify that the power
LED is blinking orange before continuing.
Locate the Wi-Fi name (SSID) and password for your DCH-M225
device. These details are printed on the speciication sticker on the
underside of the device. Using your computer or mobile device's
Wi-Fi connection utility, connect to the SSID of your DCH-M225
and enter the password. If you are unsure of how to connect to a
wireless network, please refer to "Connect to a Wireless Network"
on page 33, or consult your device's user manual. Once connected,
you are ready to begin the setup process.
There are two ways to conigure your DCH-M225; using the QRS
Mobile app on your smartphone or tablet device, or using the
web GUI on your computer.
For detailed information on either of the methods for coniguring
your DCH-M225, refer to the following sections of the manual:
• "QRS Mobile App Setup" on page 9
• "Setup Wizard" on page 14
D-Link DCH-M225 User Manual

Setting Up Your DCH-M225

Outlet
DCH-M225
Input: 100-240VAC, 50-60Hz, 0.3A
FCC ID:KA2CHM225A1
IC: 4216A-CHM225A1
Model: DCH-M225A1
CAN ICES-3 (B)/NMB-3(B)
P/N: BCHM225LNA...A1
S/N:RZEP1YMXXXXXX
H/W Ver.: A1 F/W Ver.:1.00
Wi-Fi Name(SSID):dlink-XXXX
Wi-Fi Password:XXXXXXXXXX
8