Configure The Dap-1330 Using A Web Browser - D-Link DAP-1330 Quick Install Manual

Configure the DAP-1330
You may log into the web-based configuration utility on the DAP-1330 to perform the
following tasks:
• Upgrade firmware
• Change wireless and network settings
• Change the login password
1
Plug the DAP-1330 in an available outlet near your router. You may move it to a
more suitable location after configuration.
Open the wireless utility on your wireless device or computer. Select the Wi-Fi
2
Network name (from the Wi-Fi Configuration Card) and enter the password. You
may also connect the DAP-1330 to your router or computer using an Ethernet
cable.
Open a web browser (e.g., Internet Explorer, Firefox, Safari, or Chrome) and enter
3
http://dlinkap.local./. You may also enter the IP address of the DAP-1330.
DAP-1330 Install Guide
Using a Web Browser
Wi-Fi Name(SSID):
dlink-2c19
Wi-Fi Password:
gccnu80856
Web browser link:
http://dlinkap2c19.local.
7