Replacement Procedures - Kodak i1400 Series Maintenance Manual

Replacement
procedures
5-8
This section provides procedures for replacing the following parts. Use
the list below as a guideline for frequency or replacement. Usage
figures are not guaranteed. Customer-operating environments,
document type, the condition of documents being scanned, and not
following the recommended cleaning and replacement procedures, can
cause the life of the consumables to vary.
• Separator Module: 200,000 document pages
• Pre-separation Pad: 250,000 document pages
• Feed Module: 500,000 document pages
• Imaging Guides: replace when guides are scratched or damaged
NOTES:
• Kodak Scanners use replaceable tires that can feed a wide range of
document types, sizes and thicknesses. Tire life and performance will
vary based on the customer's document set, the frequency of
cleaning the transport and tires, and following the recommended
schedule for changing tires. You should change the tires if you notice
an increase in multiple feeds, stoppages, or a decrease in feeder
performance that is not resolved by following the cleaning
procedures.
• Certain paper types (such as carbonless paper or newsprint), failure
to clean regularly, and/or use of non-recommended cleaning solvents
can shorten roller life.
A-61550 February 2010