Power Connector - HP PAVILION 311 Maintenance And Service Manual

Power connector

Description
Power connector (includes cable)
Before removing the power connector, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Accessory compartment cover (see
b. Hard drive (see
c. Keyboard (see
d. Top cover (see
e. Display assembly (see
f. System board (see
Remove the power connector:
1. Disconnect the power connector cable from the system board.
2. Remove the power connector.
Reverse this procedure to install the power connector.
Maintenance and Service Guide
"Battery" on page
"Keyboard" on page
"Hard drive" on page 4-18)
"Keyboard" on page 4-21)
"Top cover" on page 4-24)
"Display assembly" on page
"System board" on page
4-7).
4-21)
4-31)
4-38)
Removal and replacement procedures
Spare part number
591851-001
4–41