HP PAVILION 311 Maintenance And Service Manual page 73

CAUTION: Support the display assembly when removing the following screws. Failure to support the display
Ä
assembly can result in damage to the display assembly and other computer components.
5. Remove the 4 Phillips PM2.0×7.0 screws 1 that secure the display assembly to the base enclosure.
6. Lift the display assembly 2 straight up and remove it.
7. If it is necessary to replace the display bezel or any of the display assembly internal components:
a. Remove the hinge covers 1.
b. Flex the inside edges of the top edge 2, the left and right sides 3, and the bottom edge 4 of the display
bezel until the bezel disengages from the display enclosure.
c. Remove the display bezel 5.
Maintenance and Service Guide
Removal and replacement procedures
4–33