Connect The Ac Adapter And Start Charging - HP OmniBook 800 Getting Started Manual

C A U T I O N
Starting Out with Your OmniBook
Setting Up

2. Connect the ac adapter and start charging

Plug the power cord into the ac adapter, then into a grounded ac outlet.
Plug the connector from the ac adapter into the socket at the right-rear corner
of the OmniBook.
The Charging Light
Color Meaning for Battery
Off Not charging (no power connection).
Green Charged 90% - 100%.
Orange Charging.
Red Bad battery or missing battery.
Use the ac adapter shipped with the OmniBook (HP part number F1044B or
other Hewlett-Packard adapter intended for use with the OmniBook 800).
Using any other adapter could damage the OmniBook and void your warranty.
Always plug the ac adapter into a grounded outlet. Also, the adapter plug has
negative polarity —the inner contact is negative, and the outer is positive.
is different from many other adapters.
1-4
This