Plug In The Floppy Drive - HP OmniBook 800 Getting Started Manual

7. Plug in the floppy drive

1. Find the floppy-drive cable included with the OmniBook.
2. Plug the larger plug (pinching its tabs) into the back of the floppy drive.
3. Plug the smaller plug into the floppy-drive port at the back of the OmniBook.
Hint When possible, plug in the OmniBook ac adapter while you're using the floppy
drive. This prevents the battery from running down.
C A U T I O N Always wait until all disk activity stops (the Busy light is off) before ejecting a
disk or unplugging a cable.
When unplugging the cable, pinch the two tabs on the plug.
The plug-in floppy drive accepts 3.5-inch disks (1.44 MB and 720 KB).
There are two models of this drive: the one not pictured has the disk-eject button
on top of the drive.
Disk-eject button
Starting Out with Your OmniBook
Setting Up
1-9