HP OmniBook 800 Getting Started Manual page 49

Battery Safety
To avoid risk of fire, burns, or damage to your battery pack, do not allow a
metal object to touch across the battery contacts.
The battery pack is suitable for use only with an HP OmniBook 800 and, if
desired, the HP F1063B battery charger.
Do not disassemble. There are no serviceable parts inside.
Do not dispose of the battery pack in fire or water.
Handle a damaged or leaking lithium-ion battery with extreme care. If you
come in contact with the electrolyte, wash the exposed area with soap and
water. If it contacts the eye, flush the eye with water for 15 minutes and seek
medical attention.
Do not expose the battery pack to high storage temperatures (above 60 °C,
140 °F).
When the battery is not in use, store it in the battery pouch provided.
When discarding a battery pack, contact your local waste disposal provider
regarding local restrictions on the disposal or recycling of batteries.
To obtain a replacement battery, contact your local dealer or HP sales office.
Do not charge the battery pack if the ambient temperature exceeds
45 °C (113 °F ).
LED Safety
The infrared port located on the back panel of the OmniBook is classified as a
Class 1 LED (light-emitting diode) device according to International Standard
IEC 825-1 (EN60825-1). This device is not considered harmful, but the following
precautions are recommended:
If the unit requires service, contact an authorized HP service center—see the
OmniBook Support and Service booklet.
Do not attempt to make any adjustment of the unit.
Avoid direct eye exposure to the infrared LED beam. Be aware that the beam is
invisible light and cannot be seen.
Do not attempt to view the infrared LED beam with any type of optical device.
CLASS 1 LED PRODUCT
LEDSCHÜTZKLASSE 1 PRODUKT
Specifications, Regulatory, and Safety Information
Safety Information
3-5