Inquiry Data - Seagate ST12400N Product Manual

Hawk 2 family
Table of Contents

Advertisement

42
________________________________________________________________________________________
11.3.1

Inquiry data

11.3.1.1
Standard Inquiry data
Table 11.3.1-1 following lists the Standard Inquiry command data that the drive should return to the initiator per
the format given in the SCSI-2 Interface Product Manual P/N 77738479, section 5.1.1.3.
Bytes
0-15
16-31
32-47
48-63
64-79
80-95
96-111
112-127
128-143
144-148
Notes.
*Copyright Year - changes with actual year.
**
01 means SCSI-1 implemented;
02 means SCSI-2 implemented. ST12400N/ND/NC Family drives can be changed between these two
configurations. Default is 02.
***
01 means response data is in SCSI-1 format and has compatability with Common Command Set data.
02 means response data is in SCSI-2 format. The drive can be changed between these two configurations.
Default is 02.
R#
Four ASCII digits representing the last four digits of the product Firmware Release number. This informa-
tion is also given in the Vital Product data page C0h, together with servo RAM and ROM release numbers.
S#
Eight ASCII digits representing the eight digits of the product serial number.
D#
Four ASCII digits representing the firmware distribution diskette serial number.
[ ]
Bytes 18 through 24 will reflect model of drive. Shown here are hex values for ST12400N. Codes for
ST11900N drive are 31, 31, 39, 30, 30, 4E. Codes for the "ND" model drive add 44, and codes for the "NC"
model drives add 43.
11.3.1.2
Inquiry Vital Product data
Instead of the standard Inquiry data shown in Table 11.3.1-1, the initiator can request several Vital Product data
pages by setting the Inquiry command EVPD bit to one. The SCSI-2, Version 2 Interface Product Manual P/N
77738479, Section 5.1.1.3.1 lists the Vital Product Data pages supported and describes their formats. A separate
Inquiry command must be sent to the drive for each Vital Product data page the initiator wants the drive to send
back.
Product Manual - Hawk 2 Family SCSI-2 (Volume 1), Rev. B
Table 11.3.1-1. ST12400N/ND family drive Standard Inquiry data
Data (HEX)
00 00 ** *** 8F 00 00 12 53 45 41 47 41 54 45 20
53 54 [31][32][34] [30][30][4E][20] 20 20 20 20 20 20 20
R# R# R# R# S# S# S# S# S# S# S# S# 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 43 6F 70 79 72 69 67 68 74 20 28 63 29 20 31* *COPYRIGHT
39* 39* 33* 20 53 65 61 67 61 74 65 20 41 6C 6C 20
72 69 67 68 74 73 20 72 65 73 65 72 76 65 64 20
D# D# D# D#
VENDOR ID
PRODUCT ID
NOTICE

Advertisement

Table of Contents
loading

Table of Contents