Table of Contents
Advertisement
28
_________________________________________________________________________________________
7.4.4.2
Vibration
a. Operating
The drive, as installed for normal operation, shall operate error free while subjected to continuous vibration
not exceeding
5-22 Hz @ 0.040 inches (1.03 mm) displacement
22-400 Hz @ 1.0 g
Vibration may be applied in the X, Y, or Z axis.
b. Nonoperating
The limits of nonoperating vibration shall apply to all conditions of handling and transportation. This includes
both isolated drives and integrated drives.
The drive shall not incur physical damage or degraded performance as a result of continuous vibration not
exceeding
5-22 Hz @ 0.081 inches (2.05 mm) displacement
22-400 Hz @ 2.00 g's
Vibration may be applied in the X, Y, or Z axis.
7.4.5
Air cleanliness
The drive is designed to operate in a typical office environment with minimal environmental control.
7.5
Electromagnetic compatibility
7.5.1
Electromagnetic susceptibility
As a component assembly, the drive is not required to meet any susceptibility performance requirements. It is the
responsibility of the system integrator to perform those tests required to ensure that equipment operating in the
same system as the drive does not adversely affect the performance of the drive. See section 6.1.2, and see
Table 7.2-1, DC Power Requirements.
Product Manual - Hawk 2 Family SCSI-2 (Volume 1), Rev. B
Advertisement
Table of Contents
