Maxtor D740X-6L 20.0 AT Product Manual page 87

4 G I K U V G T
Features
Sector Count
Sector Number
Cylinder Low
Cylinder High
Device/Head
Command
NORMAL OUTPUTS - None
ERROR OUTPUTS - If the device does not support this command, if SMART is
disabled or if the values in the Features, Cylinder Low or Cylinder High registers are
invalid, an Aborted command error is posted.
4 G I K U V G T
Error
Sector Count
Sector Number
Cylinder Low
Cylinder High
Device/Head
Status
PREREQUISITES - DRDY set equal to one. SMART enabled.
DESCRIPTION - This command causes the device to immediately save any updated
attribute values to the device's non-volatile memory regardless of the state of the
attribute autosave timer. Upon receipt of this command from the host, the device sets
BSY, writes any updated attribute values to non-volatile memory, clears BSY and
asserts INTRQ.
  
1 1
  
na UNC na
na
na
na
na
obs na obs
BSY DRD DF
Y
Maxtor D740X-6L 20.0/40.0/60.0/80.0GB AT
ATA Bus Interface and ATA Commands
  
D3h
4Fh
C2h
D
B0h
  
IDNF na ABRT na
DEV na
na DRQ na
 
 
na
na ERR
6-21