Maxtor D740X-6L 20.0 AT Product Manual page 77

6 C D N G  
0
1
2
3
4–11
12–19
6 C D N G  
0
1
2
3
4
5
6
7
Bytes 4 – 7 will be set to FFh for bad track entries.
0 Q V G
C o n f i g u r a t i o n
In addition to the SET FEATURES command, the Maxtor D740X-6L 20.0/40.0/
60.0/80.0GB AT hard disk drives provide two configuration commands:
• The SET CONFIGURATION command, which enables the host to
change DisCache and Error Recovery parameters
• The READ CONFIGURATION command, which enables the host to
read the current configuration status of the drive
See Chapter 5 for more details about DisCache and setting cache parameters. See
Chapter 5 also for more information about error detection and defect management.
DEFECT LIST DATA FORMAT
$ ; 6 ' & ' 5 % 4 + 2 6 + 1 0
0
1Dh
8* (Number of Defects)
(MSB)
8* (Number of Defects)
(LSB)
Defect Entry #1
Defect Entry #2
•
•
DEFECT ENTRY DATA FORMAT
$ ; 6 ' & ' 5 % 4 + 2 6 + 1 0
Defect cylinder (MSB)
Defect cylinder
Defect cylinder (LSB)
Defect head
Defect sector (MSB)
Defect sector
Defect sector
Defect sector (LSB)
Maxtor D740X-6L 20.0/40.0/60.0/80.0GB AT
ATA Bus Interface and ATA Commands
6-11