Table of Contents
Advertisement
47160 rev3_Layout 1 02/09/2011 13:57 Page 5
Using the Steam Wand
to froth milk
Fill the Water Tank
coffee maker.
Plug the coffee maker into the mains.
Place the Steam Wand (2)10mm deep into a
jug of milk. Turn the Steam Control
WARNING
WHEN FROTHING MILK ENSURE THE STEAM
CONTROL IS OFF BEFORE REMOVING THE
WAND FROM THE MILK.
1 1
(13)
and place into the
3 3
5
(1)
On.
Ensure the On/Off Switch
(10)
Control
(1)
are set to Off. Select Steam (8).
Slide the On/Off Switch
(10)
Espresso Temperature Indicator Light
stop flashing when the coffee maker is ready.
When done, Turn the Steam Control to Off
BEFORE removing the Wand from the Milk.
2
and Steam
4
to On. The
(9)
will
6
5
Advertisement
Table of Contents
