ECS Motherboard User Manual page 56

Motherboard User's Guide
Suspend Mode
Use this item to define how your system suspends. In the default,
S1(POS), the suspend mode is equivalent to a software power
down. If you select S3 (STR), the suspend mode is a suspend to
RAM, i.e., the system shuts down with the exception of a refresh
current to the system memory.
Suspend Time Out
This sets the timeout for Suspend mode in minutes. If the time
selected passes without any system activity, the computer will
enter power-saving Suspend mode.
Resume On RTC Alarm / Date / Hour / Minute / Second
The system can be turned off with a software command. If you
enable this item, the system can automatically resume at a fixed
time based on the system's RTC (realtime clock). Use the items
below this one to set the date and time of the wake-up alarm. You
must use an ATX power supply in order to use this feature.
Keyboard Power On
If you enable this item, system can automatically resume by
pressing any keys, hot or power key on the keyboard, or typing in
the password. You must use an ATX power supply in order to use
this feature.
LAN/Ring Power On
The system can be turned off with a software command. If you
enable this item, the system can automatically resume if there is
an incoming call on the Modem/Ring, or traffic on the network
adapter. You must use an ATX power supply in order to use this
feature.
S3/S4 USB Device Power On
If you enable this item, only in S3/S4 mode, the system can
automatically resume by using the USB device.
32