Jumper Settings
Connecting two pins with a jumper cap is SHORT; removing a
jumper cap from these pins, OPEN.
1
1
JP4
JP3
JP2: Clear CMOS Jumper
Use this jumper to clear the contents of the CMOS memory. You
may need to clear the CMOS memory if the settings in the Setup
Utility are incorrect and prevent your motherboard from operating.
To clear the CMOS memory, disconnect all the power cables from
the motherboard and then move the jumper cap into the CLEAR
setting for a few seconds.
Function
Clear CMOS Short Pins 1-2
Normal
JP3/JP4/JP5/JP6: USB Power Select Jumper
Use these jumpers to select the voltage for USB ports:
• • • • •
USBLAN1 Power Selector: JP3
Function
VCC5V
SB5V
Chapter 2: Motherboard Installation
Jumper Setting
Short Pins 2-3
Jumper Setting
Short pins 1-2
Short pins 2-3
15
1
JP5
JP6
1
1
JP2