Connecting Optional Devices - ECS Motherboard User Manual

Connect the power connector from the power supply to the
ATXPW1 connector on the motherboard. The CPUPW1 is a
+12V connector for CPU Vcore power.
If there is a cooling fan installed in the system chassis, connect the
cable from the cooling fan to the SYSFAN1/2 fan power connec-
tor on the motherboard (SYSFAN2 is an optional connector).
Connect the case switches and indicator LEDs to the PANEL1
header. Here is a list of the PANEL1 pin assignments.
Pin Signal
1 HD_LED_P(+)
3 HD_LED_N(-)
5 RESET_SW_N(-)
7 RESET_SW_P(+)
9 RSVD_DNU

Connecting Optional Devices

Refer to the following for information on connecting the
motherboard's optional devices:
1
AUDIO2
1
SPDIFO1
Chapter 2: Motherboard Installation
Pin Signal
2 FP PWR/SLP(+)
4 FP PWR/SLP(-)
6 POWER_SW_P(+)
8 POWER_SW_N(-)
10 KEY
1
1
USB3 USB2
17
IR1
1
SPK1
1