Standard Cmos Setup Page - ECS Motherboard User Manual

Motherboard User's Guide

Standard CMOS Setup Page

This page displays a table of items defining basic information
about your system.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
System Time
System Date
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Floppy A
Floppy B
System Time & System Date
These items set up system date and time.
Primary IDE Master/Primary IDE Slave/Secondary IDE
Master/Secondary IDE Slave
Use these items to configure devices connected to the Primary
and Secondary IDE channels. To configure an IDE hard disk
drive, choose Auto. If the Auto setting fails to find a hard disk
drive, set it to User, and then fill in the hard disk characteristics
(Size, Cyls, etc.) manually. If you have a CD-ROM drive, select
the setting CDROM. If you have an ATAPI device with remov-
able media (e.g. a ZIP drive or an LS-120), select Floptical.
Floppy A/B
These items set up size and capacity of the floppy diskette
drive(s) installed in the system.
Standard CMOS Setup
00:00:10
Fri 10/24/2003
User [Enter], [TAB] or
[SHIFT-TAB] to select a
Hard Disk
field.
Not Detected
Use [+] or [-] to configure
Not Detected
system time.
CD/DVD ROM
1.44 MB 3 1/2"
Disabled
26
Help Item