Download Print this page

HP Mini 700 Maintenance And Service Manual Page 54

Hewlett-packard netbook maintenance and service guide.
Hide thumbs

Advertisement

5.
Open the device as far as possible.
6.
Remove the Phillips PM2.0×4.5 screw (1) and the Phillips PM2.5×5.0 screw (2) that secure the top
cover to the base enclosure.
7.
Lift the rear edge of the top cover (1) and swing it up. Then slide the top cover back slightly to rest
against the display assembly (2) at an angle.
8.
Release the ZIF connector (1) to which the TouchPad button board cable is connected.
46
Chapter 4 Removal and replacement procedures

Advertisement

   Related Manuals for HP Mini 700

Comments to this Manuals

Symbols: 0
Latest comments: