Component Replacement Procedures; Service Tag - HP Compaq Mini 700 Maintenance And Service Manual

Component replacement procedures

This chapter provides removal and replacement procedures.
There are as many as 49 screws, in 7 different sizes, that must be removed, replaced, or loosened when
servicing the device. Make special note of each screw size and location during removal and replacement.

Service tag

The service tag, affixed to the bottom of the device, provides information that may be needed when
troubleshooting system problems. The service tag provides the following information:
(1) Product name: This is the product name affixed to the front of the device.
(2) Serial number (s/n): This is an alphanumeric identifier that is unique to each product.
(3) Part number/Product number (p/n): This number provides specific information about the product's
hardware components. The part number helps a service technician to determine what components and
parts are needed.
(4) Model description: This is the number used to locate documents, drivers, and support for the device.
(5) Warranty period: This number describes the duration of the warranty period for the device.
When ordering parts or requesting information, provide the device serial number and model description
provided on the service tag.
Component replacement procedures 35