HP Compaq Mini 700 Maintenance And Service Manual page 75

d. Remove the two Phillips PM2.0×3.0 screws (1) that secure the webcam module to the display
enclosure.
e. Remove the webcam module (2). The webcam module is available as spare part number
504594-001 for all 8.9-inch panels or 515213-001 for 10.1-inch panels (Compaq Mini 700
only).
7. If it is necessary to replace the display panel, perform the following steps:
a. Remove the nine Phillips PM2.0×3.0 screws that secure the display panel to the display
enclosure.
b. Remove the wireless antenna cables (1) from the clips and routing channels built into the
display and brackets (2).
Component replacement procedures 67