Table of Contents
Advertisement
4.
Detach the SIM card cable (3). The SIM card cable is attached to the battery bay with tape.
Reverse this procedure to install the USB board.
If it is necessary to replace the internal display switch module, perform the following steps:
1.
Remove the Phillips PM2.0×3.0 screw (1) that secures the internal display switch bracket to the
base enclosure.
2.
Remove the internal display switch bracket (2) and module (3) from the base enclosure.
Reverse this procedure to install the internal display switch.
62
Chapter 4 Removal and replacement procedures
Hide quick links:
Advertisement
Table of Contents
