Download Print this page

HP Mini 700 Maintenance And Service Manual: Removal And Replacement Procedures Preliminary Replacement Requirements; Tools Required; Service Considerations; Plastic Parts

Hewlett-packard netbook maintenance and service guide.
Hide thumbs

Advertisement

4
Removal and replacement procedures
Preliminary replacement requirements
Tools required
You will need the following tools to complete the removal and replacement procedures:
Flat-bladed screwdriver
Magnetic screwdriver
Phillips P0 and P1 screwdrivers
Service considerations
The following sections include some of the considerations that you must keep in mind during
disassembly and assembly procedures.
NOTE:
As you remove each subassembly from the device, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.
Plastic parts
CAUTION:
care when handling the plastic parts. Apply pressure only at the points designated in the maintenance
instructions.
Cables and connectors
CAUTION:
the reassembly process. Improper cable placement can damage the device.
Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat
or seat the cables during removal and insertion. Handle cables by the connector whenever possible. In
all cases, avoid bending, twisting, or tearing cables. Be sure that cables are routed in such a way that
they cannot be caught or snagged by parts being removed or replaced. Handle flex cables with extreme
care; these cables tear easily.
Using excessive force during disassembly and reassembly can damage plastic parts. Use
When servicing the device, be sure that cables are placed in their proper locations during
Preliminary replacement requirements
29

Advertisement

   Related Manuals for HP Mini 700

Comments to this Manuals

Symbols: 0
Latest comments: