Additional Remote Function ( Channel 3 ) - Code Alarm CSI-300 Owner's Manual

4 button remote security system with dual stage shock sensor
Table of Contents

Advertisement

during the Panic sounding period.
3. During the panic mode, the Lock and Unlock buttons can be used to lock and
unlock the doors, (if the option is installed), however once the unlock/disarm
button is pressed, the vehicle's starter inhibit device, (where installed) will be
disabled allowing the vehicle to start.

ADDITIONAL REMOTE FUNCTION ( CHANNEL 3 )

This security system has a Trunk Release Output to control an electric trunk if your
vehicle is so equipped. This optional output can be connected to any device listed
below if your vehicle does not have an electric trunk release, or and electric trunk
release can be added for you to take advantage of this feature.
Operation of the optional accessory or accessories, can be controlled by pressing
and holding the Trunk button on the keychain transmitter for four seconds.
ALTERNATE OUTPUT:
This system is designed with an additional output that responds when the pro-
grammed transmitter button is presed two times in succession. The intent of this
priority output is for use with an upgrade "Remote Start Module", however it can be
used to operate any other option that may have been added to your vehicle. Check
with your inbstallation center to see if any options have been added that may be
controlled by this output, and how it is accessed.
This transmitter button also serves as a Panic/Car Finder Button as mentioned
earlier in this manual.
ADDITIONAL REMOTE FUNCTION ( CHANNEL 4 )
This security system has an additional feature that can be connected to a number
of different optional accessories. Some of the more common uses for this channel
are:
Remote Trunk Release
Remote Window Closure
To activate the optional accessory, press the programmed button on the keychain
transmitter for up to 8 seconds for continuous output, or press and release for
momentary activation. The optional accessory will immediately engage. Check
with your installation center for more information on the optional accessory that
may have been installed and how it is accessed.
ADDITIONAL REMOTE FUNCTION ( CHANNEL 5 )
This security system has an additional feature that can be connected to a number
of different optional accessories. Some of the more common uses for this channel
are;
Remote Trunk Release
Remote Window Closure
To activate the optional accessory, press the programmed button on the keychain
transmitter for up to 8 seconds for continuous output, or press and release for
momentary activation. The optional accessory will immediately engage.
Remote Car Starter
Remote Garage Door Interface
Remote Car Starter
Remote Garage Door Interface
Page 9
128-
9 OF 12

Advertisement

Table of Contents
loading

Table of Contents