Konica Minolta magicolor 4690MF User Manual page 46

LAMP WARMUP TIME
BUZZER VOLUME
INITIAL MODE
TONER EMPTY
TONER NEAR EMPTY
34
Setting
AUTO
Specify the warm-up time for the lamp of the
scanner unit.
If is selected, the length of time to
AUTO
recover from Energy Save mode when the
machine is turned on is adjusted according to
the room temperature. Since the machine can-
not be used until its condition is completely sta-
bilized, select this setting, for example, if you
wish to scan at a high image quality from the
first page.
If is selected, the machine can be used
FIX
after lamp warm-up is finished. With a low room
temperature, the quality of the first page of a
copy or scanned image may not be as good as
if was selected.
AUTO
Setting
OFF
Select the volume of the sound produced when
a key is pressed and of the alarm that is
sounded when an error occurs.
Setting
COPY
Specify the default mode when the machine is
turned on or when all settings in the control
panel return to their default settings.
Setting
STOP
Select whether or not printing, copying and fax-
ing stop when the toner has run out.
If is selected, printing, copying and faxing
STOP
stop when the toner runs out.
If
BW CONTINUE
printing, monochrome copying and fax recep-
tion can continue when one or more color toners
run out while black toner still remains.
Setting
/
ON OFF
When the toner is nearly run out, a warning
message appears.
Configuration Menu Overview
/
FIX
/ /
LOW HIGH
/
FAX
/
BW CONTINUE
is selected, monochrome