About Duplex Printing; How Do I Autoduplex - Konica Minolta magicolor 4690MF User Manual

About Duplex Printing

Duplex (double-sided) printing can be done with this printer, which has the
duplex unit built in as a standard. If the paper has low opacity (high translu-
cency), then the printed data from one side of the page will show through to
the other side. Check your application for margin information. For best
results, print a small quantity to make sure the opacity is acceptable.
Note
Only plain paper, 60–90 g/m
"Specifications" on page 68.
Duplexing envelopes, labels, letterheads, postcards, thick stock, glossy
media or transparencies is not supported.

How do I autoduplex?

Check your application to determine how to set your margins for duplex
(double-sided) printing.
The following Binding Position settings are available.
1
1
1
1 1
About Duplex Printing
If "Short Edge Binding" is selected, the pages will be laid
out to flip at the top.
1
3
If "Long Edge Binding" is selected, the pages will be laid out
to flip at the side.
1 3
2
(16–24 lb bond) can be autoduplexed. See
91