Fujitsu 68.6 cm (27") Operating Manual page 8

OSD description
Setting colour temperature and colours
Calling the Colour setting window
Selecting the colour temperature
The "warmth" of the screen colours is set using the colour temperature. The colour
temperature is measured in K (= Kelvin). You can select from sRGB, 6500 K, 7500K
9300 K, Native and Custom Color.
sRGB
Native
Custom Colour
In the user-defined setting you can change the colour ratios of the basic colours
(red, green, blue) as required.
Setting display of the OSD menu
Calling the Setup setting window
Input select Selecting VGA or DVI Input
Language Setting a language for the OSD menu
Activate/deactivate DDC-CI function
DDC-CI
On = the DDC-CI function is activated (default setting)
Off = the DDC-CI function is deactivated
Setting the display duration of the OSD menu
OSD
timeout
With this function you select a value from 10 to 120 seconds.
If the set time expires without a setting being made, the OSD menu is automatically
faded out.
Factory recall Activating the factory settings
With this function all settings are reset to the factory settings without prompting for
confirmation.
Press the
displayed.
Displaying information
Calling the Information setting window
With this function the model designation, serial number, resolution, H/V frequency,
signal input, mode, colour temperature, ACR mode and overdrive time are
displayed.
= setting colour display according to the sRGB standard
= Original colour of the LCD display
= User-defined colours
button to activate the function. The Auto Processing message is