Monitor Settings Using The Osd Menu - Fujitsu 68.6 cm (27") Operating Manual

Locking the OSD menu
The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
► Press and hold the sensor key
the ON/OFF switch.
A message is displayed that the action has been performed.
Please proceed in the same manner to release the locked OSD menu again.
Locking the ON/OFF button
The ON/OFF switch can be locked to prevent accidental or unauthorised changes to the monitor
settings.
► Press and hold both buttons ECO and Input key simultaneously for a few seconds.
A message is displayed that the action has been performed.
Please proceed in the same manner to release the locked ON/OFF switch again.

Monitor settings using the OSD menu

With the buttons on the control panel, call up and use the integrated OSD (On-Screen display) menu.
The OSD menu is available in different languages. The English menu names are used in
i
the following description (default setting). With the OSD function Language in the OSD Setup
you can select another language.
Language selection
After turning on the Display the first time, a language selection will appear.
Please select a language.
To set the OSD menu, perform the following steps:
► Press the MENU button to activate the OSD menu.
The active menu level shows a bright background and a blue coloured cursor bar. The inactive menu
level areas show the grey background.
The first symbol (Brightness/ Contrast) is blue coloured. In the right-hand part of the Display the
associated functions are shown.
► If necessary, press the
for a few seconds while you switch on the monitor with
or button to mark another icon (e.g. Image adjust).
6 5
OSD description