Display assembly
NOTE:
The display assembly spare part kit includes a webcam/microphone module and cable, 2
WLAN antenna transceivers and cables, nameplate, and logo.
Description
With bronze finish:
15.6-in, WVA, AntiGlare LED display assemblys
15.6-in, WVA, BrightView LED display assembly
15.6-in, SVA, BrightView LED display assembly
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the memory module compartment cover (see "Expansion memory module").
6.
Remove the top cover (see
Remove the display assembly:
1.
Disconnect the following cables:
a.
Bluetooth module cable (1)
b.
Ambient light sensor module cable (2)
c.
Display panel cable (3)
d.
Wireless antenna cables (4)
Battery on page
36).
Top cover on page
39).
Spare part number
591172-001
602481-001
602480-001
Component replacement procedures
61