Lamp Run Time; Switching To Stand-By; Input Connections; Input Module Insertion Into The Projector - Barco R9001260 Owner's Manual

Connections

Lamp Run Time

Lamp run time is 1000 hours. Operating the lamp longer than 1000 hours may damage
the projector. Please replace the lamp.
Warning : Using a lamp for more than 1000 hours is dangerous, the
lamp could explode.

Switching to stand-by.

Input connections.

Input module insertion into the projector :

Switching off

STANDBY
WARNING : When switching to standby, never restart projec-
tion (hot restrike) within the first 3 minutes to avoid damage
to the lamp.
0 I
Lamp run time
980 hours
WARNING
Lamp run time is 1000 hours
Operating the lamp longer
than 1000 hours may damage
the projector.
Please replace the lamp
<ENTER> to confirm²