Usb Board - HP CQ60 Series Maintenance And Service Manual

USB board

Description
USB board
USB board cable (includes num lock LED)
Before removing the USB board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Optical drive (see
b. Hard drive (see
c. Keyboard (see
d. Keyboard cover (see
e. Power button board (see
f. Display assembly (see
Remove the USB board:
1. Disconnect the USB board cable 1 from the system board.
2. Disconnect the num lock LED cable 2 from the system board.
3. Lift the USB board 3 straight up to remove it from the computer.
Reverse this procedure to install a USB board.
Removal and replacement procedures
"Battery" on page
"Optical drive" on page
"Hard drive" on page 4-10)
"Keyboard" on page 4-17)
"Keyboard cover" on page
"Power button board" on page
"Display assembly" on page
4-7).
4-8)
4-20)
4-22)
4-23)
Spare part number
486633-001
496837-001
4–37