Show Storm-Control; Show Bandwidth - TP-Link TL-SG5428 Cli Reference Manual

Parameter
port
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the configurations of all Ethernet ports:
TL-SG5428(config)# show interface configuration
Display the configurations of port 2:
TL-SG5428(config)# show interface gigabitEthernet 1/0/2 configuration

show storm-control

Description
The show storm-control command is used to display the storm-control
information of Ethernet ports.
Syntax
show storm-control [ interface { gigabitEthernet port | range gigabitEthernet
port-list }]
Parameter
port
port-list —— The list of Ethernet ports.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the storm-control information of port 4, 5, 6, and 7:
TL-SG5428(config)# show storm-control interface range gigabitEthernet
1/0/4-7

show bandwidth

Description
The show bandwidth command is used to display the bandwidth-limit
information of Ethernet ports.
Syntax
——
The Ethernet port number.
——
The Ethernet port number.
133