Chapter 13 Ip Verify Source Commands; Ip Verify Source; Show Ip Verify Source - TP-Link TL-SG5428 Cli Reference Manual

Chapter 13 IP Verify Source Commands

IP Verify Source is to filter the IP packets based on the IP-MAC Binding entries. Only the packets
matched to the IP-MAC Binding rules can be processed, which can enhance the bandwidth utility.

ip verify source

Description
The ip verify source command is used to configure the IP Verify Source mode
for a specified port. To disable the IP Verify Source function, please use no ip
verify source command.
Syntax
ip verify source {sip | sip+mac}
no ip verify source
Parameter
sip | sip+mac—— Security type. "sip" indicates that only the packets with its
source IP address and port number matched to the IP-MAC binding rules can be
processed. "sip+mac" indicates that only the packets with its source IP address,
source MAC address and port number matched to the IP-MAC binding rules can
be processed.
Command Mode
Interface Configuration Mode ( interface gigabitEthernet / interface range gigabitEthernet）
Example
Enable the IP Verify Source function for gigabitEthernet ports 5-10. Configure
that only the packets with its source IP address, source MAC address and port
number matched to the IP-MAC binding rules can be processed:
TL-SG5428(config)#interface range gigabitEthernet 1/0/5-10
TL-SG5428(config-if-range)#ip verify source sip+mac

show ip verify source

Description
The show ip verify source command is used to display the IP Verify Source
74