Ip Dhcp Snooping Mac-Verify; Ip Dhcp Snooping Limit Rate - TP-Link TL-SG5428 Cli Reference Manual

ip dhcp snooping mac-verify

Description
The ip dhcp snooping mac-verify command is used to enable the MAC Verify
feature. To disable the MAC Verify feature, please use no ip dhcp snooping
mac-verify command. There are two fields of the DHCP packet containing the
MAC address of the Host. The MAC Verify feature is to compare the two fields
and discard the packet if the two fields are different.
Syntax
ip dhcp snooping mac-verify
no ip dhcp snooping mac-verify
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Example
Enable the MAC Verify feature for port 2:
TL-SG5428(config)# interface gigabitEthernet 1/0/2
TL-SG5428(config-if)# ip dhcp snooping mac-verify

ip dhcp snooping limit rate

Description
The ip dhcp snooping limit rate command is used to enable the Flow Control
feature for the DHCP packets. The excessive DHCP packets will be discarded.
To restore to the default configuration, please use no ip dhcp snooping limit
rate command.
Syntax
ip dhcp snooping limit rate value
no ip dhcp snooping limit rate
Parameter
value
0/5/10/15/20/25/30(packet/second). The default value is 0, which stands for
disable.
—— The value
65
of Flow Control. The options are