To Activate Full Pointing Stick Capabilities - HP OmniBook 4150 Reference Manual

Windows 2000

To activate full pointing stick capabilities

Under Windows 2000, full pointing stick capabilities are not available at this time.
If you have activated full touch pad capabilities, you can use this procedure to switch
back to full pointing stick capabilities.
Remove the touch pad driver
From Control Panel, click Add/Remove Program and remove touch pad.
Enable the pointing stick
1. From the Start menu, shut down, then restart the OmniBook.
2. When you see the HP logo, press F2 to enter the BIOS Setup utility.
3. Select the System Devices menu.
4. Highlight Internal Pointing Devices and select Pointing Stick. (Choose Both if you
want basic touch pad features available.)
5. Press F10 to save and exit.
Install pointing stick support
From Control Panel, open Mouse, General and click Change. Click Have Disk, point
to the directory listed below, and select IBM PS/2 TrackPoint.
–or–
In Windows 98, from Control Panel, open System, Device Manager, Mouse, Standard
PS/2 Port Mouse, Driver, click Update Driver, and select the option to display a list of
drivers. Click Have Disk, point to the directory listed below, and select IBM PS/2
TrackPoint.
c:\Omnibook\Drivers\Trackpnt
Operating the OmniBook
Using the OmniBook Pointing Devices
Reference Guide 27