Led Safety - HP OmniBook 4150 Reference Manual

Specifications and Regulatory Information
Safety Information
Radiation Performance Standard and International Standards IEC 825 / IEC 825-1
(EN60825 / EN60825-1). These devices are not considered harmful, but the following
precautions are recommended:
Ensure proper use by reading and following the instructions carefully.
If the unit requires service, contact an authorized HP service center—see "Support
Assistance" on page 120.
Do not attempt to make any adjustment of the unit.
Avoid direct exposure to the laser beam—do not open the unit.
CLASS 1 LASER PRODUCT
LASER KLASSE 1

LED Safety

The infrared port located on the back of the OmniBook is classified as a Class 1 LED
(light-emitting diode) device according to International Standard IEC 825-1 (EN60825-
1). This device is not considered harmful, but the following precautions are
recommended:
If the unit requires service, contact an authorized HP service center—see "Support
Assistance" on page 120.
Do not attempt to make any adjustment of the unit.
Avoid direct eye exposure to the infrared LED beam. Be aware that the beam is
invisible light and cannot be seen.
Do not attempt to view the infrared LED beam with any type of optical device.
CLASS 1 LED PRODUCT
LEDSCHÜTZKLASSE 1 PRODUKT
134 Reference Guide