Setting Up For The First Time; To Set Up The Omnibook And Windows - HP OmniBook 4150 Reference Manual

Setting Up for the First Time

CAUTION
Introducing the OmniBook
Setting Up for the First Time
When you set up the OmniBook for the first time, you'll need to install and charge the
battery, connect the ac adapter, turn on the OmniBook, and go through the Windows
setup program.

To set up the OmniBook and Windows

Use only the HP adapter model F1454A (or other approved adapter) with this
product. Using any other ac adapter could damage the OmniBook and may void
your warranty. Refer to the warranty statement for your product.
1. If present, remove the "weight-saving" module by sliding the release latch forward,
then pushing it back as far as it will go. With the latch open, insert the OmniBook's
main battery.
2. Plug in the ac adapter.
3. Connect the ac adapter to the OmniBook's right side, as shown. The OmniBook
battery starts charging.
Let the battery charge a full 24 hours to completely charge the internal clock battery.
Otherwise, the OmniBook may not keep the correct date and time.
4. Press the blue power button.
16 Reference Guide