Detecting Video Loss Alarm - HIKVISION DS-7600NI Series User Manual

User Manual of DS-7600NI Series NVR

8.3 Detecting Video Loss Alarm

Purpose:
Detect video loss of a channel and take alarm response action(s).
Steps:
1. Enter Video Loss interface of Camera Management and select a channel you want to detect.
Menu> Camera> Video Loss
2. Set up handling method of video loss.
Check the checkbox of "Enable Video Loss Alarm", and click
loss.
3. Set up arming schedule of the channel.
1) Select Arming Schedule tab to set the channel's arming schedule.
2) Choose one day of a week and up to eight time periods can be set within each day.
3) Click Apply button to save the settings.
Note: Time periods shall not be repeated or overlapped.
Figure 8. 10 Set Arming Schedule of Video Loss
4. Select Linkage Action tab to set up alarm response action of video loss (please refer to Chapter Setting
Figure 8. 9 Video Loss Setup Interface
113
button to set up handling action of video