Applying Power - KTI Networks KGD-600 Installation Manual

2.6 Applying Power

The switch provides two types of power interfaces, terminal block and DC power jack for receiving DC
power input from external power supply system.
Using Terminal Blocks
Three terminal contacts are provided:
One 3P terminal plugs are provided together with the switch. The plug is shown below:
Install the power source wires with the plug properly. Then, plug in the terminal block socket.
Vdc Positive (
Vdc Negative (
Chassis ground
( Vdc : +5V ~ +30VDC)
Power wires : 24 ~ 12AWG (IEC 0.5~2.5mm
+
) terminal
-
) terminal
2
)
-14-