Ingress Settings - KTI Networks KGD-600 Installation Manual

4.6.3.2 Ingress Settings

Configuration Description
Port Port number
Tag Aware Check tag data for every received packet
Tag-aware - set to activate Tag-based mode
Tag-ignore - set to use port-based mode and ignore any tag in packet
Keep Tag Tag is removed from the received packet if exists
Enable - set to activate tag removal for VLAN-tagged packets
Disable - set to disable tag removal function
Drop Untag Drop all untagged packets and priority-tagged packets
Enable - drop untagged packets and priority-tagged packets
Disable - admit untagged packets and priority-tagged packets
Drop Tag Drop all VLAN-tagged packets
Enable - drop VLAN-tagged packets
Disable - admit VLAN-tagged packets
[Apply] Click to apply the configuration change
[Refresh] Click to refresh current configuration
[Back] Click to go back to upper menu
Note:
1. Priority-tagged packet (VID=0) is treated as untagged packet in the switch.
2. [Tag Aware] setting affects the index used for VLAN classification (VLAN table lookup).
The following table lists the index used:
Received packet type
Untagged
Priority-tagged (VID=0)
VLAN-tagged (VID>0)
3. Both [Drop Untag] and [Drop Tag] are set to Disable to admit all packets.
Ingress [Tag Aware] setting
Tag-ignore Tag-aware
PVID PVID
PVID PVID
PVID Packet tag VID
-37-