Coniguration; Easy.search.utility - D-Link DNS-1200-5 User Manual

Section 3 - Coniguration
When irst powered on, during the initial boot sequence, the ShareCenter will wait to be assigned an IP address via
DHCP. If it does not receive a DHCP assigned IP address, by default it will have a self-assigned IP address in the range
of 169.254.0.0 to 169.254.255.255. It is recommended to use the included D-Link Easy Search Utility when accessing
and coniguring the ShareCenter for the irst time. If you want to change the IP address before logging in or are unable
to connect to the ShareCenter IP address, you can use the Easy Search Utility provided on the product CD to locate
the device on your network and make any needed changes.
The Easy Search Utility displays any
ShareCenter devices it detects on the network
Storage Device
here.
Click Refresh to refresh the device list.
Click Coniguration to access the Web based
coniguration of the ShareCenter.
Conigure the LAN Settings for the ShareCenter
here.
Click Apply to save changes to the LAN
Settings.
Displays the available iSCSI targets on
ShareCenter.
Mapping
Click Connectyto connect to the iSCSI target.
Click Management to edit the information.
Volumes available for mapping are displayed
here.
Choose an available drive letter. Click Connect
vailable Drive
to map the selected volume. Click Disconnect
Letters
to disconnect the selected mapped volume.
Click About to view the software version of the
Easy Search Utility.
Click Exit to close the utility.
D-Link ShareCenter Pro 1200 User Manual

Coniguration

Easy Search Utility
11