Table of Contents
Advertisement
Section 3 - Coniguration
Click the FTP tab to see the following window.
The default port for FTP is 21. Enter a port
number in the range of 1025 to 3688, 3690 to
49999, and 65501 to 65535.
The default port range for passive FTP is from
55536 to 55663. Click the Useytheyfollowingy
Passive FTP
portyrange radio button and manually enter
the port range from 1025 to 65535.
Click Enable to respond with external IP
address for the passive FTP connection
external IP
request.
address for
Passive mode
Use the drop-down menu to select the
supported language for the FTP clients.
Use the drop-down menu to select the
maximum number of concurrent FTP
connection.
Use the drop-down menu to select the
maximum number of concurrent FTP per IP
per IP
connection.
Use the drop-down menu to select the time
that the FTP server logs out the user after this
Time
period of idle time.
Click Enable to restrict the bandwidth of each
FTP connection. Enter the number in KB/s for
Restriction
the maximum speed of upload and download.
Click Enable to allow anonymous FTP to log
in.
Support
Click Enable to only allow SSL or TLS
connection requests from the FTP clients.
Connection Only
Click Apply to save the settings.
D-Link ShareCenter Pro 1200 User Manual
FTP
103
Advertisement
Table of Contents
