How To Set Up Lan Alerts - MAXDATA PLATINUM User Manual All Efforts Have Been Made To Offer A

11. From the Options menu, choose Configure Event Actions.
12. In the Platform Event Paging Actions window, move the events that you want to generate
an alert to the Enabled column and move all other events to the disabled column using
the following buttons:
• >>: Moves all events from the enabled list to the disabled list.
• >: Moves the selected event from the enabled list to the disabled list.
• <: Moves the selected event from the disabled list to enabled the list.
• <<: Moves all events from the disabled list to the enabled list.
13. Click Save to save the changes.
14. Click Close to return to the PEP Configuration window.
15. To send a test page to verify that you have correctly configured PEP, from the Options
menu, choose Send Alert.
16. Click Save to save the configuration.
17. Click Close to return to the Platform Event Manager window.

How to Set Up LAN Alerts

To set up the server to send alerts over the LAN you can use either the SSU or the SCW. For
more information about LAN alerts, see the documentation for Intel
software.
To use the Server Configuration Wizard to configure the server to send alerts over the LAN:
1. Use the Resource CD to boot the server to the Server Configuration Wizard.
2. Select Server Configuration Wizard and Continue.
3. Select Run Wizard and Continue.
4. Select the configure this server for LAN Alerting box. The box that says configure this
server for remote Server Management over a LAN connection will be automatically
selected as a dependency.
5. Review the system date and time for accuracy and Continue.
6. In the IP Setup screen, choose either:
• DHCP: The IP address for the server is automatically assigned by the DHCP (dynamic
host control protocol) server on the network. The Host, Gateway, and Subnet Mask
boxes in the dialog are ignored.
• Static: Assign the IP address for the server using the Host, Gateway, and Subnet Mask
boxes in the dialog.
7. If you chose Static IP Setup in the previous step, fill in the IP addressing boxes:
• Host IP Address: The IP address of this server.
• Gateway IP Address: The IP address of the router for this server.
• Subnet Mask: The IP address for the server subnet. The server uses this to decide if the
alert destination is on the same subnet.
• Backup Gateway IP Address: (optional). The IP address of the alternate router for this
server.
8. Click Continue. Click the LAN Password button (optional) to require that a password
be entered before a user can perform server management functions on this
a workstation on the LAN.
MAXDATA PLATINUM Server Board
Server Management
®
server from
41