Configuring The Adaptec Aic-7902 Scsi Adapter; Adaptec Main Menu; Menu For Each Scsi Channel; Exit Menu - MAXDATA PLATINUM User Manual All Efforts Have Been Made To Offer A

Configuring the Adaptec AIC-7902 SCSI Adapter

The Adaptec AIC-7902 SCSI adapter has two busses. Select the bus from the following
menu:
Table 6. Adaptec Main Menu
Menu Item
You have an AIC-7902 adapter in your system.
Move the cursor to the bus:device:channel of the
one for configuration and press <Enter>.
<F5> - Toggle color/monochrome.
After selecting the bus, the following menu displays:
Table 7. Menu for each SCSI Channel
Host Adapter
AIC-7902 at Bus:
Device:Channel
01:06:A (or 01:06:B)
When you are finished, press <Esc> and make your selection from the following menu:
Table 8. Exit Menu
Feature Option
Exit Utility? Yes
No
MAXDATA PLATINUM Server Board
Option Comment
Configure/View Press <Enter> to view the Configuration Menu.
Host Adapter
Settings
SCSI Disk Utilities Press <Enter> to view the SCSI Disk Utilities Menu.
This menu allows you to format hard disks and/or verify
disk media.
Comment
When you finish configuring your SCSI devices, press <Esc>. Then select Yes
and press <Enter>. When this message appears:
Please press any key to reboot.
Press any key, and the server reboots.
Options
Bus:Device:Channel
01:06:A
01:06:B
25