To Insert And Remove A Cd; To Insert A Pc Card - HP 2000/5700 User Manual

Press the reset

To insert and remove a CD

When the OmniBook is reading data from the CD-ROM drive, the
CD disk indicator appears on the Status Panel.
Caution
Do not insert or remove a CD while the OmniBook is actively reading data.
Wait until the CD-ROM drive is done. Otherwise, the OmniBook could stop
responding.
1. Press the open button on the front of the CD-ROM drive.
2. Place the CD in the drive and gently press down to seat it on the spindle.
3. Close the door to the drive.
4. To remove the CD, press the open button on the front of the CD-ROM drive.

To insert a PC card

The OmniBook PC card slots are available for storing data and expanding the
communication capabilities of the OmniBook. The OmniBook supports standard
Type I, II, and III PC cards (PCMCIA and CardBus). You can use two thin cards or
one thick card. The lower card slot supports Zoomed Video, which allows a zoomed
video card to show high-quality multimedia presentations.
button.
25