To Insert Or Remove A Dvd Or A Cd - HP OmniBook 7100 Reference Manual

To insert or remove a DVD or a CD

Do not remove a DVD or CD while the OmniBook is actively reading data.
C A U T I O N
Otherwise, the OmniBook could stop responding and you could lose data.
1. Press the button on the face of the drive tray. If the cardboard packing insert is
2. Place the DVD or CD into the drive (label facing up) and gently press down to
3. Slide the DVD tray back into the module to close it.
If you lose power to the OmniBook, or if you have removed the module from the
OmniBook, you can manually open the drive to remove a disk.
Insert a straightened paper clip into the recessed hole on the front of the
drive, as shown.
present, be sure to remove it.
seat the disk on the spindle.
–or–
Remove the disk.
Making Connections
Using OmniBook Plug-In Modules
4-5