Troubleshooting; Solving Problems; Printing Problems - HP 2000/5700 User Manual

7. Troubleshooting

Solving Problems.

If you run into problems using your OmniBook, you can use the suggestions in this
chapter for getting back on track. You can also check the contents and index for
pointers to related information.
If you have questions that this manual doesn't answer, you can
See the troubleshooting chapter in the OmniBook Installation and Setup Guide if
you have problems that interfere with turning on or starting the OmniBook.
Check OmniBook Notes for the most current troubleshooting suggestions.
Look at the online Help for Windows and other applications.
Check with your computer system administrator, if you have one.
Check your local library or bookstore for other books about Windows, MS-DOS,
and other applications.
Contact your dealer, or contact Hewlett-Packard. See the OmniBook Support
and Service booklet or open OmniBook Support in the online OmniBook Library.
Solving Problems
This section separates problems into the following categories:

Printing problems.

Memory problems.
Pointing device and mouse problems.
File, drive, and PC card problems.
Serial and infrared communications problems.
Sound problems.
Display problems.
Power problems.
Lockup problems.
Printing Problems
If a serial printer doesn't print
Check that you're using a proper cable or cable adapter.
Select the Fast Printing Direct To Port option—in OmniBook Tools click
Connections and Printers, then select the serial printer and click Connect.
If an infrared printer doesn't print
If you're printing to an infrared printer, make sure its port is set to LPT3 (not
LPT1). Check the printer's settings. You can also try using COM4 instead.
60